青海南部熔积岩的发现:对寻找VMS型矿床的重要启示     

杨志明  侯增谦  Noel C White  杨开辉  宋玉财  王召林 《矿床地质》2008,27(3)

熔积岩指的是侵入、混合到未固结或弱固结的湿沉积物中的熔浆分解、原位形成的一类特殊岩石。正确地认识该类岩石,有利于增进人们对岩浆-水(沉积物)相互作用过程的理解,恢复古环境。在青海南部沱沱河地区发现了一套角砾为撕片状、锯齿状及浑圆状的安山岩,胶结物为铁硅质组合的特殊熔积岩。研究表明,该熔积岩的角砾为岩浆遇水后快速淬火、裂解的产物,铁硅质组合为海底喷气沉积形成的含铁建造;且安山岩与含铁建造发生混合时,含铁建造尚未固结。该套熔积岩的发现,改变了长期以来对开心岭铁矿为火山热液交代安山岩而形成的认识,对于在矿区寻找VMS型矿床、区域内寻找海底热水喷流沉积型矿床具有重要的启示意义。  相似文献   

Asymmetrically zoned reaction rims: assessment of grain boundary diffusivities and growth rates related to natural diffusion-controlled mineral reactions   总被引：1，自引：0，他引：1  

L. M. KELLER  R. WIRTH  D. RHEDE  K. KUNZE  R. ABART 《Journal of Metamorphic Geology》2008,26(1):99-120

This study explores garnet coronas around hedenbergite, which were formed by the reaction plagioclase + hedenbergite→garnet + quartz, to derive information about diffusion paths that allowed for material redistribution during reaction progress. Whereas quartz forms disconnected single grains along the garnet/hedenbergite boundaries, garnet forms ～20‐μm‐wide continuous polycrystalline rims along former plagioclase/hedenbergite phase boundaries. Individual garnet crystals are separated by low‐angle grain boundaries, which commonly form a direct link between the reaction interfaces of the plagioclase|garnet|hedenbergite succession. Compositional variations in garnet involve: (i) an overall asymmetric compositional zoning in Ca, Fe²⁺, Fe³⁺ and Al across the garnet layer; and (ii) micron‐scale compositional variations in the near‐grain boundary regions and along plagioclase/garnet phase boundaries. These compositional variations formed during garnet rim growth. Thereby, transfer of the chemical components occurred by a combination of fast‐path diffusion along grain boundaries within the garnet rim, slow diffusion through the interior of the garnet grains, and by fast diffusion along the garnet/plagioclase and the garnet/hedenbergite phase boundaries. Numerical simulation indicates that diffusion of Ca, Al and Fe²⁺ occurred about three to four, four and six to seven orders of magnitude faster along the grain boundaries than through the interior of the garnet grains. Fast‐path diffusion along grain boundaries contributed substantially to the bulk material transfer across the growing garnet rim. Despite the contribution of fast‐path diffusion, bulk diffusion through the garnet rim was too slow to allow for chemical equilibration of the phases involved in garnet rim formation even on a micrometre scale. Based on published garnet volume diffusion data the growth interval of a 20‐μm‐wide garnet rim is estimated at ～10³–10⁴ years at the inferred reaction conditions of 760 ± 50 °C at 7.6 kbar. Using the same parameterization of the growth law, 100‐μm‐ and 1‐mm‐thick garnet rims would grow within 10⁵–10⁶ and 10⁶–10⁷ years respectively.  相似文献   

高、低煤阶煤层气藏地质特征及控气作用差异性研究   总被引：4，自引：0，他引：4  

王勃  巢海燕  郑贵强  李景明  郭志斌  王红岩  刘洪林  李贵中 《地质学报》2008,82(10):1396-1401

高、低煤阶煤层气地质特征及控气作用差异性是研究煤层气富集成藏的重要组成部分,是煤层气勘探开发理论研究过程中重要的基础性研究领域之一。本文以中国沁水、阜新盆地和美国粉河盆地等典型的含气盆地为例,探讨了高、低煤阶煤层气的储层物性差异,分析了构造控气和水文地质控气作用的差异性。研究表明,高煤阶气藏含气量高,CH4百分含量高,δ13C1值大于-38.75‰,储层渗透率变化小,储层改造难,构造热事件对煤层气的生成、富集贡献大,持续的水动力使气藏遭到破坏,且破坏幅度大,现今地下水格局对气藏的形成具有一定的影响;低煤阶气藏含气量低,CH4百分含量低,δ13C1值大于-49.11‰,储层渗透率变化大,储层易改造,煤热演化史及煤阶影响着煤层气的生成、富集,在煤层气生成过程中活跃的水动力是甲烷生成的主要的水文地质条件之一,但持续的水动力使气藏遭到破坏,且破坏幅度小,而合适的地层水矿化度则是低煤阶煤层气生成的重要条件,地下水格局对气藏的调整和改造起到决定性的影响。  相似文献   

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis   总被引：1，自引：0，他引：1  

Konstadinos N. Moutsopoulos  Alexandra Gemitzi  Vassilios A. Tsihrintzis 《Environmental Geology》2008,54(5):1081-1090

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.  相似文献   

The largest karst cave discovered in a tunnel during motorway construction in Slovenia’s Classical Karst (Kras)   总被引：1，自引：0，他引：1  

Martin Knez  Tadej Slabe  Stanka Šebela  Franci Gabrovšek 《Environmental Geology》2008,54(4):711-718

Karst researchers of the Karst Research Institute ZRC SAZU are regularly consulted during the planning of Slovenia’s motorways and invited to observe and monitor construction in the karst areas. More than 350 caves have been discovered in the course of building 60 km of new motorways over the past decade. Access to the most important caves is preserved by concrete tubes closed with metal covers at the roadside. The largest cave system in a tunnel, named LC-S647, is almost entirely preserved. The protection of this cave will serve as a good example for the preservation of natural heritage in the future. Construction work for the motorway uncovered a high degree of karstification. In particular, the discovery of this cave in the Kastelec tunnel LC-S647 showed the existence of a major cave system in the geological and speleological past. A number of unconnected passages have also been found. Caves discovered during highway construction have brought new knowledge about the cavernosity and the geological history of this part of the karst.  相似文献   

Landslide susceptibility mapping for a landslide-prone area (Findikli,NE of Turkey) by likelihood-frequency ratio and weighted linear combination models   总被引：17，自引：0，他引：17  

Aykut Akgun  Serhat Dag  Fikri Bulut 《Environmental Geology》2008,54(6):1127-1143

Landslides are very common natural problems in the Black Sea Region of Turkey due to the steep topography, improper use of land cover and adverse climatic conditions for landslides. In the western part of region, many studies have been carried out especially in the last decade for landslide susceptibility mapping using different evaluation methods such as deterministic approach, landslide distribution, qualitative, statistical and distribution-free analyses. The purpose of this study is to produce landslide susceptibility maps of a landslide-prone area (Findikli district, Rize) located at the eastern part of the Black Sea Region of Turkey by likelihood frequency ratio (LRM) model and weighted linear combination (WLC) model and to compare the results obtained. For this purpose, landslide inventory map of the area were prepared for the years of 1983 and 1995 by detailed field surveys and aerial-photography studies. Slope angle, slope aspect, lithology, distance from drainage lines, distance from roads and the land-cover of the study area are considered as the landslide-conditioning parameters. The differences between the susceptibility maps derived by the LRM and the WLC models are relatively minor when broad-based classifications are taken into account. However, the WLC map showed more details but the other map produced by LRM model produced weak results. The reason for this result is considered to be the fact that the majority of pixels in the LRM map have high values than the WLC-derived susceptibility map. In order to validate the two susceptibility maps, both of them were compared with the landslide inventory map. Although the landslides do not exist in the very high susceptibility class of the both maps, 79% of the landslides fall into the high and very high susceptibility zones of the WLC map while this is 49% for the LRM map. This shows that the WLC model exhibited higher performance than the LRM model.  相似文献   

An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting   总被引：1，自引：0，他引：1  

Mauro Lo Cascio  Yan Liang  Nobumichi Shimizu  Paul C. Hess 《Contributions to Mineralogy and Petrology》2008,156(1):87-102

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Greening as strategic development in industrial change - Why companies participate in eco-networks   总被引：1，自引：0，他引：1  

Eckhard Störmer 《Geoforum》2008,39(1):32-47

Networking between companies and other regional key actors has grown into a widespread instrument for economic development since the 1990s. Participatory networks have formed the concept for many activities of Local Agenda 21. Simultaneously, economic geography has focused on network theories to explain innovation in and the economic success of regions.This article focuses on the reasons why individual actors participate in environmentally oriented information networks. The questions approached are: Does the concept of learning within networks influence a firm’s development? How do the participants interact with each other? What effects do the networks have on their environment (arenas)?The changing arenas of a firm are analysed with regard to environmental concerns. These changes need to be anticipated for reliable strategies. To gain information and knowledge about current behaviour and activities, the functions of networks as learning platforms are discussed. Drawing upon arguments from different network theories, the motivations of participating in a network are threefold: actor and firm oriented, network internal (inter-firm), and network external. From these, a generic target cube of network motivations and actions is set up.The concept is reviewed by examining 12 ‘regional environmental information-oriented corporation networks’ (RUN) in the Greater Munich Area. The empirical material reveals that this type of network does not provide a guarantee for significant improvements in a firm’s environmental behaviour. However, participants learn about best practices while pursuing explicit or implicit aims as to influence their arenas.  相似文献   

Drawing the line: the history of the Jurassic—Cretaceous boundary     

John C.W. Cope 《Proceedings of the Geologists' Association. Geologists' Association》2008,119(1):105-117

  相似文献   

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method   总被引：2，自引：0，他引：2  

S.‐H. Chen  X.‐M. Feng  S. Isam 《国际地质力学数值与分析法杂志》2008,32(12):1459-1477

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献